Guide to Naviextras Toolbox

Welcome to Map Updates

The navigation update process will require you to go to your car, your computer, and back to your car to complete this process. Please note, navigation updates can also be performed by your local Toyota dealership.

To perform these updates, please prepare:

  • an empty FAT32 formatted USB flash drive (recommended free size at least 32GB)
  • broadband internet connection,
  • one of the supported operating systems, installed on your computer:
    • Windows: the latest and two earlier versions are supported,
    • macOS: the latest and two earlier versions are supported.

Follow these steps to check for Navigation Updates

Step1: Check the Software version of the navigation system

Download Software Update Instruction

Please check the Navigation version is 9.35.2.256336,
PS. please follow the instuction to find the Navigation version.

If the Navigation version shows 9.35.2.256336,
please follow the instruction to update Navigation System software.

Download Software

After finished the update process or version is not 9.35.2.256336, let us go to the next step.

*Note: Please do not turn off the vehicle engine during the update.

Step2: Synchronize the usb flash drive with the navigation system

  1. Download Map Update Instruction
  2. Switch your vehicle to “ENGINE ON” until the Infotainment System fully bootup into the caution page, then enters the main page of the Infotainment System by press “OK”.
  3. Insert the formatted USB flash drive to the USB port on your Infotainment System.
  4. Press the Navigation icon > Navigation Main Menu > Update > Download System Information to USB.
  5. Once system shows the "Operation successful" message, please press "OK", then the USB flash drive can be removed from the Infotainment system

    *Note: Please do not turn off the vehicle engine during the update.

Step3: Download map updates

Download Naviextras Toolbox Download Naviextras Toolbox

  1. After installation start the application.
  2. Insert the USB flash drive to the computer and execute the NAVIEXTRAS TOOLBOX application.
    NAVIEXTRAS TOOLBOX will verify if there is a new map update available.
  3. Follow the instruction of STEP2 to finish the map download
    Once the NAVIEXTRAS TOOLBOX has finished, the USB drive can be removed from the computer.

    *Note: The map download time varies based upon internet connection speed and map region.

Step4: Map update to your Infotainment system

  1. Insert the USB flash drive into the appropriate slot in your Infotainment system and turn on the vehicle.
  2. Infotainment System will show "Do you want to update the map content?".
  3. Click YES and the map update process will be commenced.
  4. Once the system shows [Content update successful], the Map update process is completed.
    the USB flash drive can be removed.

    *Note: Please do not turn off the vehicle engine during the update.

    New map content will only take effect at next Infotainment System startup.

© 2024 NNG Software Developing and Commercial Llc. All rights reserved.

Texts, illustrations and pictures displayed on this portal are for information purposes only and shall not be considered as an offer. NNG does not make any representations regarding the correctness, accuracy, timeliness or completeness of the content available at this portal. NNG reserves the right to change such information at any time without notice. Information published at this portal may refer to products, programs or services that are not available in your country. Such references do not imply that NNG intends to sell such products, programs or services in your country.